t: +44 (0)1462 893254

f: +44 (0)1462 896288

e: info@duckworth-and-kent.com


quick search, use product code or brief description then press GO
Ophthalmic Product Range
Veterinary Specific Products
Neurosurgical Product Range

Products - New Products


Below are the 15 latest products introduced to the Duckworth & Kent product range.

This page is continually being updated with our new products as they are introduced.
Code Product Name Info
9-518-1R Round Handle Fujimoto CCC Guide - Ř5.3mm
Provides guide for centralisation of capsulorhexis.
9-518-2R Round Handle Fujimoto CCC Guide - Ř5.6mm
Provides guide for centralisation of capsulorhexis.
9-654 Limoli Goniometric Caliper
Used to mark the desired axis of the Toric IOL alignment
9-741-3 Barrett 2.75mm Incision Marker
Two 2.0mm parallel lines 2.75mm apart
8-650-1 Avolio Irrigation Handpiece
21 gauge with flattened tip, curved shaft with two side ports
DK7786-1 Screw Thread Injector
Suitable for the AMO One Series™ Ultra Cartridge
8-655-1 Avolio Aspiration Handpiece
21 guage with flattened tip, curved shaft
6-182-1 Otaka Dilator
Marks on tips at specific diameters, from 0.5mm to 1.3mm in 0.1 increments
2-132NR8 Colibri Toothed Forceps (0.12mm)
0.12mm toothed, tip length 2.0mm, short round handle (8mm diameter)
6-085-7 Barrett Phaco-Axe with Horizontal Chopper
Dual instrument; Barrett Axe - vertical chopping, chopper - Horizontal Chopping
2-2-716G-8 Calladine-Inamura Flat Handle Capsulorhexis Forceps, Scleral Tunnel Incision
With incorporated gauge to assist in assessing the size of the capsulorhexis
2-2-706G-1 Mackool-Inamura Flat Handle Capsulorhexis Forceps with Pointed Tips
Increased curvature of forceps shafts prevent corneal deformation
2-2-706G-1R Mackool-Inamura Round Handle Capsulorhexis Forceps with Pointed Tips
Increased curvature of forceps shafts prevent corneal deformation
2-2-716G-9R Calladine-Inamura Round Handle Capsulorhexis Forceps, Corneal Incision
With incorporated gauge to assist in assessing the size of the capsulorhexis
2-110-2NR8 Straight Toothed Forceps (0.2mm)
Short round handle (8mm diameter), 0.20mm 1 x 2 teeth
Company | Site Map | Privacy & Security | Contact Us | Send Feedback
©1998 - 2010 Duckworth & Kent Ltd. All rights reserved. Use of this website signifies your agreement to the Terms of Use.